Refractory Products

Home  /  Products  /  Refractory Products

We manufacture high temperature mortars servicing refractory and petrochemical industries. Also supplied are dry mortars, fibre mastics, mica sheets and refractory beads.

Mortar Range

Mortar Description
AT Cement Siliceous Mortar for jointing firebricks in normal oxidising conditions. Since this material has a very low alumina content it does not form a eutectic and cause the brick to melt.
ROCKSET General purpose high strength Mortar for use up to 1600°. Rockset is a grey/brown mortar containing Alumina.
BR5 Extra strong, high purity cement for super-duty firebrick and insulating brick. BR5 is white in colour.
BR6 Water retentive Mortar for insulating bricks and fibre blanket. BR6 is white in colour.
DRY ROCKSET Dry version of Rockset.
DRY BR5 Dry version of BR5.

Mortar Range Downloads

Click below to download the Mortar Range Datasheet:

Micasil

Micasil-C

Micasil-C is an electro-thermal insulation sheet. It is a flexible composite material consisting of phlogopite mica paper layers bonded with silicone resin.Micasil-C is mainly recommended as slip plane insulation between the crucible and the induction coil in induction furnaces and other thermal applications.

Micasil-P

Micasil-P is an electro-thermal insulation sheet. It is a flexible composite material consisting of phlogopite mica paper layers bonded with silicone resin. Micasil-P is mainly recommended as slip plane insulation between the crucible and the induction coil in induction furnaces and other thermal applications.

Micasil Downloads

Click below to download further information about Micasil:

Repair Products

Silroc - Fire Putty

Application

Silroc is a ready-to-use, plastic refractory putty/mouldable.

Chemical Composition

Silroc is a very low iron, siliceous product having a typical Iron Oxide content of 0.5% and Silica content of 72.0%.

Classification

Silroc has a mean permanent linear change of 2% when fired to 1000°C (=CT). It is not advisable to use Silroc beyond a maximum service temperature of 1200°C (=MST).

Silroc Fire Putty Downloads

Click below to download Silroc – Fire Putty Technical & Safety Datasheets

Zircon Wash

Application

Zircon Wash (L546D) is a “dry powder”, refractory “wash”, which requires mixing with water before use. The amount of water needed is dependent on the method of application (brushing or spraying being commonly used), the thickness required per application and personal preference.

As an approximate guide 1kg of wash would need 1 litre of water; mixing can be achieved readily by hand, but some means of mechanical assistance is preferred for complete dispersion.

Classification

It is not advisable to use Zircon Wash (L546D) beyond a maximum service temperature of 1600°C (=MST).

Zircon Wash Downloads

Click below to download the Zircon Wash Datasheet

Refractory Products Enquiries

For further information on our refractory product range, please contact us.